Today, we will be seeing a teardown of the Pioneer BDR-2212 Blu-Ray recorder. Like most PC Disc drives, a teardown is usually a very simple process.
First, let’s take a look at the drive itself:
Before attempting to open it, we must open the disc tray, so we’ll be able to remove the front faceplate:
We will now flip the drive and remove each screw:
And viola! We now have opened the drive:
Its internals are very similar to most drives. You’ll find 2 small boards: One which holds the drive controller and EEPROM, and one that holds the tray loading mechanism:
Here, you can take a closer look at both boards:
Now, lets take a front look:
The internals are also very close to other Blu-Ray drives. In this case, the DVD and Blu-Ray optics are side-by-side, while other drives have this arranged in an up-down position. The LG drive, for example, have the Blu-Ray and DVD optics in an up-down configuration while the Panasonic drive also has a very similar side-by-side setup.
On the left, we have the DVD optics while on the right, we have the Blu-Ray optics. The Optical Pickup Unit looks of very high quality. The motor is similar to other drives.
I hope this drive lasts a really long time. Internally, I would say each component looks very well designed, especially that Optical Pickup Unit. I’m still not sure whether to use this drive for CD and DVD burning, since that honor would go to my LiteOn iHAS524. It is, after all, capable of burning DVDs at up to 24x but burns most media at 20x when its OverSpeed setting is enabled. The Pioneer is able to burn up to 16x on DVD Single Layer media. I’m also not sure if the BDR-2212 is able to set the booktype on DVD+R and DVD+R DL discs, something that my LiteOn drive is able to do.
Another day, we’ll talk about how this drive handles BD-R DL media.
You can get this drive on Amazon at the following link: