Hi everyone, Today, we will be seeing 2 UGREEN products. These are a USB 3.0 6ft Extension Cable and a 4-Port USB 3.0 Hub. These 2 products have been with me since last summer and they’ve been working great. These products are being used right now as a middle point between my PC and other USB Hubs that are connected to the 4-port hub. We will be seeing those other hubs on future posts. The USB Extension cable is very…
Hi everyone, Today, we will be burning a ValueDisc BD-R disc in the Pioneer BDR-2212 drive: This drive is able to burn these discs at up to 12x. This will be the speed used on this post: Burning a disc in this drive at its maximum speed takes less than 12 minutes: Disc verification is successful: Overall, it takes less than 23 minutes to burn and verify a single disc at 12x. Here is the disc burned surface: Quality Scans…
Hi everyone, Today, we will be looking at the 50-disc spindle Blu-Ray Recordable discs from ValueDisc and burning it in the Panasonic UJ-260 drive. These are White Inkjet Printable discs, so they have a printable surface: The data side from these discs are dark grey colored: Here is a quick comparison of the disc compared with the previously-reviewed SmartBuy BD-R discs: As you can see, there is a significant difference in the data surface. The media code of these discs…
Hi everyone, Today, we will see the SmartBuy BD-RE 25GB disc. This is a rewritable, single-layer Blu-Ray disc that can hold up to 25GB of data. Rewritable discs are the slowest Blu-Ray media available, only allowing them to be burnt at up to 2x speed. This is my first time using a rewritable Blu-Ray disc, so we’ll see how it performs in my Panasonic UJ-260 drive. The discs comes in a 10-disc spindle: Similar to the SmartBuy BD-R 25GB discs,…
Hi everyone, In my previous post, I wrote about how to create a Windows 11 installation disc that would allow me to install this new Windows version on a PC without a Trusted Platform Module. I did this because my attempt from yesterday to install Windows 11 was not successful because of this requirement. Now, I’ll go through each step I did in order to install it on the same machine that failed yesterday, by using this new installation media….
Hi everyone, Today, we will see how well a SmartBuy DVD+R DL disc burn in the Optiarc AD-7561A drive. This unit supports burning these discs at a speed of 2.4x and 4x. This post will focus on a disc burned at 4x. Burning the disc seem to have gone well: While in the very first image I realized it doesn’t show the burning speed, it was actually burning at 2.4x. Same as the last image, since the drive burns in…
Hi everyone, Today, We’ll see the SmartBuy DVD+R DL 8.5GB 50-disc spindle. SmartBuy is a subsidiary of Ritek Corporation. These discs can hold up to 8.5GB of data and can be burned at up to 8x. These have a logo top: On the data side, they have a dark purple color: The Media Code of these discs is RITEK-S04-66: In some of my next few posts, we’ll see how these discs burn and scan on some of my drives. Look…
Hi everyone, Today, we will be seeing the SmartBuy BD-R 25GB 50Pk Logo Top. These discs should be able to be burned at up to 6x. SmartBuy is a subsidiary of Ritek. These discs have a blue Logo Top: On the data side, they have a gold color: A few years ago, I recall that some gold-colored discs became corrupted due to corrosion. Since these discs are gold-colored too, I’ll be checking them after a while to make sure its…
Hi everyone, Today, we’ll take a look at how the PlexDisc DVD+R discs burns in the Optiarc AD-7561A drive. We will be using ImgBurn again to perform the writing and verification. It reports the media code to be OPTODISC-R16-00 and supports writing at up to 8x here. The drive burned the disc using a Z-CLV strategy, starting at 2.4x, and jumping to 4x, 6x, and 8x: The disc appeared to have burnt fine, but the quality results seem to point…
Hi everyone, Today, we’ll see how well the PlexDisc DVD+R discs that I showed you yesterday burns in the Optiarc AD-7740H. This is a drive I took out from a Lenovo laptop that’s now part of my optical drive collection. I already have an Optiarc AD-7561A from a very old HP laptop, so this is actually my 2nd Optiarc drive. We will be using ImgBurn to perform the writing and verification. It reports the media code to be OPTODISC-R16-00 and…